Disconnect signal to analog station

[wrsudrick]

I have emergency phones that hotline to security. The emergency phones are analog stations calling digital stations. When the call is completed and the digital station hangs up what signal is sent to the analog phone?

When I monitor the call I can hear what seems to be a reversal.

Also, can this signal timing be modified?

W

[apatro]

Hi ,

Please refer the Administrators Guide for Avaya Communication manager .

The reason why it happens is

If a flashhook interval (recall window) is required, the upper and lower bounds of the interval can be administered. An on-hook that lasts for a period of time greater than or equal to the lower bound and less than or equal to the upper bound will be treated as a recall flash. If an interval is not required, the Disconnect Timing value must be administered. An on-hook that lasts for a period of time less than this value will be ignored; greater than or equal to this value will be regarded as a disconnect. Regardless, an on-hook lasting 50 to 150 ms coming from a 2500-type set will always be treated as a digit pulse unless Ignore Rotary Digits is y for that station.

This can be solved by setting the Ignore Rotary Digits parameter on the 2nd page of the station form to Y .

Ignore Rotary Digits -: If this field is y, the short switch-hook flash (50 to 150) from a 2500-type set is ignored.


Hope this helps

Avinash

[carri30]

Digital sets 2420

What about inbound calls being drop.