Incoming call handling on a trunk

[violetk1]

I have a Definity G3si system. Is there a command that lets me see if there is any incoming traffic on a trunk group?

I was advised I could run 'li trace tac xxx', but 'trace' is not an available option due to the older software version on our switch.

[sinhar]

try "list measurements trunk-group" to see the trunk traffic. If it is G3v6 then this option may not be there. G3v9, V11 and later version may have this.

[violetk1]

Incoming call handling on a trunk

Thanks Sinhar!

I do have the older version and did try the list command you suggested. It shows a summary of the various trunks and several columns. Which column indicates inbound traffic?