### connection to CHAP failed ###

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • johnbriggs
    Member
    .
    • Aug 2014
    • 8
    #1

    ### connection to CHAP failed ###

    Greetings all,

    After a recent reboot, when making a single voice call into IPOCC, the CHAP service fails.

    The TT Console (VEA) shows the following lines when the issue occurs:

    TC_General [Thread-2945 ] - connection to CHAP lost
    TC_Service - 28.000.0201 Connection to CHAP lost.

    Chap recovers after approximately 40 seconds.

    Any thoughts on what the issue might be or steps to troubleshoot this issue further is greatly appreciated.
    Tags: None
  • fcassity
    Hot Shot
    .
    • Feb 2012
    • 16
    #2
    Any ideas on this? We can only have one call before it fails.

    Comment

    • kruegerb
      Genius
      .
      • Oct 2013
      • 276
      #3
      have you checked the chap configuration? Is the SIP link between Chap and IPO working (check in chap ttrace)? check in IPO Manger for SIP extension Device Type (should be “Avaya IP Office Contact Center"). Is process chap sync running?
      Last edited by kruegerb; 07-29-2015, 09:26 AM.

      Comment

      • fcassity
        Hot Shot
        .
        • Feb 2012
        • 16
        #4
        We have reviewed the CHAP configuration and it looks right. The Extension for the Contact Center is showing a type as "Avaya IP Office Contact Center".

        The Chap Sync is running.

        Comment

        • johnbriggs
          Member
          .
          • Aug 2014
          • 8
          #5
          info from TTRace CHAP

          When a call comes in, the CHAP service fails. Below is the text from TT from when the call arrives until TTrace stops. The call remains active, but no other calls can be received until the CHAP recovers.

          C0191a 14:44:56.914 CHAP_PhoneAdapterProxy ocPhoneAdapterCBProxy:nOffered (sipadapter.dll(IPO-SIPEXT-IP-1)) contr=1 callID=934 media=2 calling=1819 called=1901 redir= orig= info=8714BD0A000001320000076B8714BD0A0000013200000 769
          C0192a 14:44:56.914 CHAP_Adapter ocLineOwnerList::vAddLineOwnerImpl owner=0x0
          C0193a 14:44:56.914 CHAP_Adapter ocLineOwnerList::vShowListInTrace entry=1 line=0 callID=0 is inuse=0 owner=0x105B9F0 ch=0 isAttached=0 isDuplicated=0 isInfo=1
          C0194a 14:44:56.914 CHAP_Adapter ocLineOwnerList::vShowListInTrace entry=2 line=0 callID=0 is inuse=0 owner=0xB29F1D0 ch=0 isAttached=0 isDuplicated=0 isInfo=1
          C0195a 14:44:56.914 CHAP_Adapter ocLineOwnerList::vShowListInTrace entry=3 line=1 callID=934 is inuse=0 owner=0x0 ch=94287553888257 isAttached=0 isDuplicated=0 isInfo=0
          C0196a 14:44:56.914 CHAP_Adapter ocLineOwnerList::vShowListInTrace entryCount=3
          C0201a 14:44:58.065 CHAP_Adapter ocLineOwnerList::bHasApplUsedAllLicenses() 0 of 30 are used.
          C0202a 14:44:58.065 CHAP_Adapter ocLineOwnerList::bHasApplUsedAllLicenses() 0 of 30 are used.
          C0203a 14:44:58.065 CHAP_Adapter ocAdapter:oGetPhone4Service(IPO-SIPEXT-IP-1) Test line=1 from=1900 to=80029.
          C0204a 14:44:58.065 CHAP_Adapter ocLineOwnerList::bIsLineOccupied line=1 is free
          C0205a 14:44:58.065 CHAP_Adapter ocAdapter:oGetPhone4Service(IPO-SIPEXT-IP-1) line=1 inService=1 is OK.
          C0206a 14:44:58.065 CHAP_Adapter ocLineOwnerList::bHasApplUsedAllLicenses() 0 of 30 are used.
          C0207a 14:44:58.065 CHAP_Adapter ocAdapter:oGetPhone4Service(IPO-SIPEXT-IP-1) Test line=1 from=1900 to=80029.
          C0208a 14:44:58.065 CHAP_Adapter ocLineOwnerList::bIsLineOccupied line=1 is free
          C0209a 14:44:58.065 CHAP_Adapter ocAdapter:oGetPhone4Service(IPO-SIPEXT-IP-1) line=1 inService=1 is OK.
          C0210a 14:44:58.065 CHAP_Adapter ocLineOwnerList::vAddLineOwnerImpl owner=0xb371800
          C0211a 14:44:58.065 CHAP_Adapter ocAdapter::Init(IPO-SIPEXT-IP-1) listEntries=4 controller=1
          C0212a 14:44:58.065 CHAP_Adapter ocAdapter::zSSTransferCall(IPO-SIPEXT-IP-1) owner=0xB371800 ch=94287553888257 destNo=1809
          C0213a 14:44:58.066 CHAP_Adapter ocLineOwnerList::vRemoveLineOwnerFromListImpl owner=0xb371800
          C0214a 14:44:58.066 CHAP_Adapter ocLineOwnerList::zRemoveSingleLineOwnerWithNoCall owner=0xb371800 result=1
          C0215a 14:44:58.066 CHAP_Adapter ocAdapter::zRegisterOwnerForCall owner=0xb371800 resType=14 xCH=94287553888257 zLine=1 zCallID=934
          C0216a 14:44:58.066 CHAP_Adapter ocAdapter::zSendStandardEvent(IPO-SIPEXT-IP-1) event=RES_EVT_EXTERN_INTERRUPT, service=0xb371800, xCh=94287553888257
          C0217a 14:44:58.066 CHAP_PhoneAdapterProxy ocPhoneAdapterProxy::eResetMediaBuffer (sipadapter.dll(IPO-SIPEXT-IP-1)) contr=1 callID=934
          C0218a 14:44:58.066 CHAP_Adapter ocAdapter::zSendStandardEvent(IPO-SIPEXT-IP-1) event=RES_EVT_DONE_STOPREAD_FILE, service=0xb371800, xCh=94287553888257
          C0219a 14:44:58.066 CHAP_PhoneAdapterProxy ocPhoneAdapterProxy::eDeflect (sipadapter.dll(IPO-SIPEXT-IP-1)) contr=1 callID=934
          C0220a 14:44:58.066 CHAP_PhoneAdapterProxy ocPhoneAdapterCBProxy:nEvent (sipadapter.dll(IPO-SIPEXT-IP-1)) contr=1 callID=934 eventCode=1 eventData=NUMBERINFO: number=1809, type=0 (unknown), reason=sstransfer
          C0241a 14:44:58 4-Aug-2015
          C0242a TTrace: Disconnected

          At the same time in the IP Office Monitor trace, there is a TCP error 104 between the IP Office and the IPOCC server.

          08:50:36 1224789127mS ERR: TCP Connection error 104 for Src=135.20.189.10:5060 Dst=135.20.189.19:56402
          08:50:36 1224789127mS ERR: TCP Connection error 104 for Src=135.20.189.10:5888 Dst=135.20.189.19:5100


          Any thoughts? Does this help?
          Last edited by johnbriggs; 08-04-2015, 12:25 PM.

          Comment

          • contr50
            Member
            • Nov 2015
            • 4
            #6
            Hi,

            how did you fix this? I think I have the same problem. IPOCC works fine with four calls. when traffic incresaes it fails and it seem like a resource problem.

            regards

            Comment

            • huntertech
              Hot Shot
              • Dec 2014
              • 19
              #7
              On the IPO / System / Telephony

              What is your maximum SIP calls set to?

              Comment

              • george6
                Whiz
                .
                • Sep 2015
                • 28
                #8
                If configuration is looking Ok, Can you enable CHAP_NetworkServiceImpl and CHAP_NetworkService for CHAP and reattach? And the Trace Output of CHAP_ShowPropertyFile command in CHAP trace.
                Last edited by george6; 12-08-2015, 05:18 AM.

                Comment

                • contr50
                  Member
                  • Nov 2015
                  • 4
                  #9
                  Originally posted by huntertech View Post
                  On the IPO / System / Telephony

                  What is your maximum SIP calls set to?
                  In System -> Telephony it has 100 simultaneous sip

                  this is the setting you asked for?

                  Comment

                  • contr50
                    Member
                    • Nov 2015
                    • 4
                    #10
                    Originally posted by george6 View Post
                    If configuration is looking Ok, Can you enable CHAP_NetworkServiceImpl and CHAP_NetworkService for CHAP and reattach? And the Trace Output of CHAP_ShowPropertyFile command in CHAP trace.
                    The property file seem OK. I checked Chap resources and they are connected and free.

                    N2678b 11:05:00.281 TT_Command CHAP_ShowPropertyFile() received
                    N2679b 11:05:00.282 TC_General
                    [CHAP_ENVIRONMENT] MusicOnHold = INF*"C:\Program Files (x86)\Avaya\IP Office Contact Center\Chap\VoiceFiles\easy.wav"
                    [CORBA] omninamesport = 2809
                    [CORBA] omninamesserver = MXMEXAWLIPOCALL
                    [CORBA] orbport = 0
                    [HARDWARE_ADAPTER] Adapter1 = SIPEXT,IPO-SIPEXT-IP-1,sipadapter.dll
                    [IPO-SIPEXT-IP-1] DNSServerIP1 = 8.8.8.8
                    [IPO-SIPEXT-IP-1] EndpointPassword1 = D1246D50C3580F87D0F17EB79EFAC33CDC0D449F00661995A2 97111CDE072D837A30546E1CA115A6E67CD30215C301
                    [IPO-SIPEXT-IP-1] EndpointUser1 = 4000
                    [IPO-SIPEXT-IP-1] EndpointUserAgent1 = Avaya CIE
                    [IPO-SIPEXT-IP-1] FaxToneDuration =
                    [IPO-SIPEXT-IP-1] FaxToneThreshold =
                    [IPO-SIPEXT-IP-1] FullQualifiedLocalHostName1 =
                    [IPO-SIPEXT-IP-1] Line1 = 4900-4999;70000-70199;80000-80049,300
                    [IPO-SIPEXT-IP-1] LocalDomainName1 = sip.mydomain.int
                    [IPO-SIPEXT-IP-1] LocalHostName1 = MXMEXAWLIPOCALL
                    [IPO-SIPEXT-IP-1] LocalIPAddress1 = 7.206.0.251
                    [IPO-SIPEXT-IP-1] LocalRTPPortRange1 = 49152-53247
                    [IPO-SIPEXT-IP-1] LocalSignalPort1 = 5100
                    [IPO-SIPEXT-IP-1] MaxCallCountPerSecond1 =
                    [IPO-SIPEXT-IP-1] MaxMultiMediaTimer =
                    [IPO-SIPEXT-IP-1] NetworkQuality1 =
                    [IPO-SIPEXT-IP-1] NodeNumberUCIDonMakeCall1 =
                    [IPO-SIPEXT-IP-1] PBXDomainName1 = sip.mydomain.int
                    [IPO-SIPEXT-IP-1] PBXIPAddress1 = 7.206.0.253
                    [IPO-SIPEXT-IP-1] PBXPingPeriod1 =
                    [IPO-SIPEXT-IP-1] PBXSignalPort1 = 5060
                    [IPO-SIPEXT-IP-1] RTPPayloadType1 = 101
                    [IPO-SIPEXT-IP-1] RingTone =
                    [IPO-SIPEXT-IP-1] SRTP1 = false
                    [IPO-SIPEXT-IP-1] SuppressUCIDonMakeCall1 =
                    [IPO-SIPEXT-IP-1] TransportTypeProtocol1 = TCP
                    [IPO-SIPEXT-IP-1] Trunk1 = false
                    [RESOURCE_POOL] Pool1 = RES_68614a56d8010000,IPO-SIPEXT-IP-1,70000-70199,200
                    [RESOURCE_POOL] Pool2 = RES_9f6f4a560a016700,IPO-SIPEXT-IP-1,80000-80049,50
                    [RESOURCE_POOL] Pool3 = RES_68614a56d8010000,IPO-SIPEXT-IP-1,4900-4999,50
                    [TTRACE] ttraceport = 10300
                    [TTRACE] ttraceserver = MXMEXAWLIPOCALL
                    N2680b 11:05:00.282 TT_Command CHAP_ShowPropertyFile() ready
                    Last edited by contr50; 12-10-2015, 04:25 PM.

                    Comment

                    Previous template Next
                    Loading