IP Phone TN configuration

[bseno]

Dear All,

For an CS 1000 11xx series IP Phones and all others series,is it possible to have a password on the phoneset when putting or changing the TN and the Node I.D?

This is for the security so that nobody can play around on the Phone to change the TN or Node I.D .

Thank you.


Regards,

Benny

[gwebster]

Look in the IP Line NTP for "IP Phone Installer Password".

[bseno]

The password 26567*738 is for IP Address configuration etc.What I want to know if there's such a password that we can provide before we define the TN and Node I.D on the the IP Phones.

Thanks.

Benny

[clanda]

Yes, there is an option for node password, we have few customers with this. I guess you can find the information in Signaling server fundamentals NTP

With this password running, after rebooting and changing node id, the user will be required to put it before the TN

[clanda]

nodePwdSet - Sets the node password. If a non-zero length password
is configured, all IP Phones that attempt to register after
this command is entered display a prompt for node
password before the TN can be modified.

nodePwdShow - Shows the node password settings.

nodePwdEnable - Enables node password checking.
nodePwdDisable - Disables node password checking.
nodeTempPwdClear - Deletes the temporary password and resets its uses and
time to zero.
nodeTempPwdSet - Sets the node-level TN entry temporary password.

[bergsj]

That helps with my issue too. Thanks!

Jeff
Fargo 45000