IP office 500 v2 карта A-LAW

[?????5]

Can you help me?

This logs from hiper terminal:

P14 Loader v1.32
CPU Board Version is: 0x04
CPU PLD Version is: 0x25
CPUID: 0x12 Present: 0xA8 Present2: 0x02
Using FPGA build 0x00000827
Programming FPGA ...
FPGA ID 0x01 Version 0x00 Build 0x00000827
Initialising NAND device.. registering..
Added device: Samsung 64MB NAND (small block) - 0x0000

SMXFS: This is a SD 2.0 card
SMXFS: This is SDHC card
SMXFS: IT'S SD/SDHC CARD
SMXFS: Sector Number is 762000
SMXFS: Sector Size is 200
OPTIONAL SD Card not present/recognised
Initialising FileSys device.. registering..
Added FileSys device
System Primary is INVALID
System Backup is INVALID
NO Main Image file
Bootp Location:
A:\system\primary\ip500v2.bin

P14 Loader v1.32 (SDRAM 128 MB)
MPC8248 CPU Revision 0x0C10
Broadcom Switch Mode was 0x05 now 0x06
EthChipRevId: 0x01 EthPhyId: 0x0143BC30
Sending BOOTP Request

[ssaini]

This is for sure a problem with the SD card as there no image file exists.

As per my understanding the system should be stuck on RED LED.

As a next action please format the SD card and populate the correct BOOTP path..

[?????5]

Thank you, problem solved

[herna77]

IP OFFICE small block

excuseme,as solution your problem.
are you format SD?