1600 registering over g4xx

[castr30]

Hi all,
I would like to know if the Ip phones could have two option of G4xx gateways to be reistered with.

The case is that we have two sites using G450 with S8300 each, (Stand alone), and there are some other remote sites where we just have 1603sw phones, so we need this remote phones can get registered to one or other G450 S8300 server, depending on if it is up (on line) or not. ie. If the server A has 200 remote phones registered and if for any reazon the remote phones can´t reach the server A we need then the remote phones to get registered with the Server B. The G450/S8300 and remote phones are all over the same lan/wan.

I appreciate your comments
Gonzalo

[castr30]

IP Address Lists and Station Number Portability

The 1600 Series IP Telephones provide the capability to specify IP address lists. On startup or a
reboot, the telephone attempts to establish communication with these various network elements
in turn. The telephone starts with the first address on the respective list. If the communication is
denied or times out, the telephone proceeds to the next address on the appropriate list and tries
that one. The telephone does not report failure unless all the addresses on a given list fail,

thereby improving the reliability of IP telephony.