Connecting IPO with PBX

[kzamra]

Dear sirs,
I have an Avaya IP Office in my company with a control unit IP500 V2, we have a hot line with 24 land lines delivered through PRI connected with SHDSL Modem, and we are about to discard the PRI with these 24 lines. And we have an analog PBX Panasonic KX-TDA 200 with 8 outside lines.
My question is: can I connect the Avaya IPO with the Panasonic PBX to pick up the land line from the Panasonic?
Any help is appreciated.
Thanks in advance
Karim Zamra

[roberto]

I'm assuming that the 8 external lines are actually 8 trunk members or channels rather than individual lines from the Panasonic PBX.

In that case, this could be accomplished with some call translations/routing changes and trunk tandeming. Something like IPO -> trunk -> PanaPBX -> trunk -> PSTN