Help with coverage answer group

[jcoole]

I have cov ans group #1 with stations a, b, c; and group #2 with stations a, b, c, x, y, z.
Coverage path point 1 is c1, point 2 is c2, but when it rolls to c2 only stations x,y,z ring.
What can I do to make all 6 stations ring at point 2?

[barblee07]

If you have CM 6.3 you can make this happen by enabling SA9123- Re-ring CAG Members in Adjacent Coverage Points. Here's the description of the feature-
"In the absence of the SA9123 feature, Communication Manager does not alert the stations that are common to two adjacent coverage answer groups."

[mlombardi1]

Guessing the SA is needed because this is double coverage? Good tip barblee.

[jcoole]

Thanks

Sorry, spam filter was catching these.
Thanks for the suggestion. We're on CM 5.2 now, upgrading to 6.3 in about two months. Until then we will stick with our current setup of brdg-appr on 3 stations and a cov-ans gp at the 2nd point.
Thanks again.