auto answer

[bfotin]

We need to enable the auto answer to one 1616 for external calls,is it possible?

[richa164]

We need to know what system you are working on ?? What software level etc etc

[bfotin]

We are working on IP Office with version 8.0.(43).

[vande56]

Our sales department is looking for the same feature as well. We are using office manager 9.0.3 and our handsets are model 9608. Thanks in advance!

[bfotin]

From our supplier I have this suggestion:
Yes you create a button on handset to turn on or off , its internal auto answer button


Internal Auto-Answer
This function is also known as handsfree auto-answer. It sets the user's extension to automatically connect internal calls after a single tone. This function should only be used on phones that support handsfree operation.
Details
·
Release: 1.0+.
·
Action: Emulation | Internal Auto-Answer.
·
Action Data: Optional.
·
If left blank this function acts as described above for internal auto-answer.
·
FF can be entered. In that case the button will enable/disable headset force feed operation for external calls. In this mode, when headset mode is selected but the phone is idle, an incoming external call will cause a single tone and then be automatically connected. This operation is only supported on Avaya phones with a fixed HEADSET button. Ring delay is applied if set on the appearance button receiving the call before the call is auto-connected.
·
Default Label: HFAns or Auto Answer.
·
Toggles: <image011.png>.
·
Status Indication: <image011.png>Required.
Status
2400, 5400 Series
4600, 5600 Series
1400, 1600, 4400, 6400, 9500 Series
9600 Series
9608, 9611
9621, 9641
T-Series,
M-Series
- On.
<Label><image012.png>
<Label>
Green on
Red on
Green on
<image013.png>Green
<image014.png>On
- Off.
<Label>
<Label>
Off
Off
Off
<image013.png>Grey
Off

·
User Admin: <image011.png>.

Phone Support
Note that support for particular phone models is also dependant on the system software level.
·
Analog: <image011.png>
·
1100 Series: <image011.png>
·
1200 Series: <image011.png>
·
1400 Series: <image011.png>[1]
·
1600 Series: <image011.png>[1]
·
20 Series: <image011.png>
·
2400 Series: <image011.png>[1]

·
3600 Series: <image011.png>
·
3700 Series: <image011.png>

·
3810: <image011.png>
·
4100 Series: <image011.png>
·
4400 Series: <image011.png>

·
4600 Series: <image011.png>[1]
·
5400 Series: <image011.png>

·
5600 Series: <image011.png>[1]
·
6400 Series: <image011.png>
·
7400 Series: <image011.png>

·
9040: <image011.png>
·
9500 Series: <image011.png>

·
9600 Series: <image011.png>
·
D100: <image011.png>
·
M-Series: <image011.png>

·
T-Series: <image011.png>
·
T3/T3 IP Series: <image011.png>[2]
1.
Not 1403, 1603, 4601, 4602, 5601 and 5602 except where 4602 is supported on Release 2.1 and 3.0DT software.
2.
May have limited support on some specific T3 phone models if detailed below.
·
T3 Phones:
·
Classic/Comfort icon: Displays HFAns.
·
DSS Link LED: On when active.