outside calls

[szleg4]

Ok, it's getting to the trunk. If you call the external number manually from the station, does it work? Looks like you're sending the five digit extension as caller ID. Telco may not like this CID. Try outpulsing the BTN or main number.

If we call the external number manually from the station, it works.
Take care, we are sending the full number so 9 digits (I remove 4 digits for confidentiality).
I have rebuilt the number with four 0 instead of the real number

[szleg4]

Here is all the detail :

Calls arrived on station 3899 with coverage path to go to coverage answer group 2
Coverage answer group 2 has only one station 5599
The station 5599 is declared with extended forwarding unconditional (internal & external) to an external number

The traces :
16:16:25 TRACE STARTED 01/19/2015 CM Release String cold-03.0.124.0-20850
16:16:30 Calling party trunk-group 2 member 28 cid 0x594
16:16:30 Calling Number & Name 156710000 NO-CPName
16:16:30 dial 3899
16:16:30 term station 3899 cid 0x594
16:16:30 idle trunk-group 2 cid 0x594

[mlombardi1]

Ok, it's getting to the trunk. If you call the external number manually from the station, does it work? Looks like you're sending the five digit extension as caller ID. Telco may not like this CID. Try outpulsing the BTN or main number.

[szleg4]

What does a trace show when the station is called and goes to remote cover? You can omit the full coverage number. Let's see if it stops at CM or at the trunk.

16:03:44 TRACE STARTED 01/19/2015 CM Release String cold-03.0.124.0-20850
16:04:27 Calling party trunk-group 2 member 6 cid 0x53e
16:04:27 Calling Number & Name 156710000 NO-CPName
16:04:27 term station 5599 cid 0x53e
16:04:27 call-forwarding 003
16:04:27 term trunk-group 2 cid 0x53e
16:04:27 dial 00385xxxxxx route:ARS
16:04:27 route-pattern 2 preference 1 location ALL cid 0x53e
16:04:27 seize trunk-group 2 member 11 cid 0x53e
16:04:27 Setup digits 00385xxxxxx
16:04:27 Calling Number & Name 156710000 NO-CPName
16:04:28 Proceed trunk-group 2 member 11 cid 0x53e
16:04:32 idle trunk-group 2 member 6 cid 0x53e

[mlombardi1]

What does a trace show when the station is called and goes to remote cover? You can omit the full coverage number. Let's see if it stops at CM or at the trunk.

[szleg4]

If there's licensing for EC500, map the station to the external number in the off-PBX table. The station and external number will ring together.

No EC500 licences. Sorry

[szleg4]

In order to give you all the information :
- the station has a coverage path to a coverage remote (0 + phone number)
- in the cos, the Extended Forwarding All is set to yes
- when we call directly the station, the external station rings.

[mlombardi1]

If there's licensing for EC500, map the station to the external number in the off-PBX table. The station and external number will ring together.

[szleg4]

depends on how you are trying to achieve this are you saying you want calls to hit the C/A group and then at one station ring off net , as with this set up you wont get that.


If you are saying something different have you got trunk to trunk transfer enabled

Thanks for your help richa164.
I confirm the station has got trunk to trunk transfer enabled.
The Customer just wants all the station to ring simultaneously (internal & external) as soon as the call arrives on the phone system. If the external phone rings two rings later it is not a problem for my customer

[szleg4]

Make sure his station is assigned to a class-of-service (COS) with "Restrict Call Fwd-Off Net" disabled. If it already is, try configuring the unconditional forwarding on page 3 of his station form.

Thanks for your help mlombardi1
His station is assigned to a class-of-service (COS) with "Restrict Call Fwd-Off Net" disabled.
I have tried to configure the unconditional forwarding for external and internal calls on page 3, but it failed too.

[richa164]

depends on how you are trying to achieve this are you saying you want calls to hit the C/A group and then at one station ring off net , as with this set up you wont get that.


If you are saying something different have you got trunk to trunk transfer enabled

[mlombardi1]

Make sure his station is assigned to a class-of-service (COS) with "Restrict Call Fwd-Off Net" disabled. If it already is, try configuring the unconditional forwarding on page 3 of his station form.

[szleg4]

Hi,
My Customer has no licence for EAS.
He has a coverage answer-group with 4 stations answering a DID number.
One of these station needs to be now forwarded to an outside number as he works from home now.
We have setup a send-call with coverage remote to do that.
Unfortunately, the calls are not forwarded to the outside number.
Thanks for your help
Kind regards