Correct Ports to open on router for remote extension on IPO 500

[idobso]

Would someone be able to tell me the correct ports to open/forward on a Draytek 2860 to use a 9608 as a remote extension.

We had it working with an old router but that went faulty and so now I need to setup the Draytek 2860. I never set the old one up.

Any input appreciated.

Ian.

[idobso]

Fixed

Hi,

I'm going to answer my own question here as I've discovered the ports needed.

This information was needed as I had to replace the existing router due to a failure/poor performance.

TCP 1720
UDP 1719
UDP 5005
UDP 49152-49410 (these were the ones originally set on the old router)

Regards,

Ian.