96XX Button Layout Needs to Match CM

[rwallo]

Good day folks

I have a site that would prefer to have the 9609/9611 buttons to appear on the phone exactly like they are in programming - Not to have call and bridged appearances move automatically to the first page.

Anyone know of the setting that places all the buttons exactly where they are programmed for the 96XX?

FYI: working with 96XX firmware 6.6.1, CM 6.0.1 and 6.3.111.

Thanks!

[fazil3]

Not sure if they will appear as it is. But you can test the below 46xxsettings.txt

SET PHNSCRALL 1 - A consolidated screen will be displayed that includes call appearances and features

SET FBONCASCREEN 1 - As many features as will fit will be displayed on the same screen as call appearances, in addition to being displayed on a separate feature screen.

PHNSCRCOLUMNS specifies whether the Phone Screen is presented with one (full-witdth) or two (each half-width) columns
## This parameter is relevant only for 9608, 9608G and 9611G phones only.

## 0 call appearance and feature button occupies the entire width of the Line (default)
## 1 call appearance and feature button occupies half the width of the Line

[coreyprimeaux]

Did this fix your issue?