We have some stations that were recently converted from DS1FD to SIP endpoints using SES 5.2. The CM version is 5.2.1. For some reason, the CDR is not working for these after the change. I have verified the follwoing parameters.
on sys parameters CDR, intra-switch CDR = y
on trunk group 90 (SIP trunk to SES), CDR reports = y
on Off-PBX configuration set (2) CDR for Calls to EC500 Destination = y
on intra-system cdr screen, the extensions are configured
Nothing changed on the CDR system.
on sys parameters CDR, intra-switch CDR = y
on trunk group 90 (SIP trunk to SES), CDR reports = y
on Off-PBX configuration set (2) CDR for Calls to EC500 Destination = y
on intra-system cdr screen, the extensions are configured
Nothing changed on the CDR system.
Comment