SM Line between SM R7.1 and IPO 9.1

[iskido]

Hello!

I have a IPO which working as Enterprise Branch ( mode distributed). I did a SIP-trunk ( SM line) between SM and IPO. Trunk is up. Also a have a trunk SM - ACM. When i make a call from ACM to IPO it is work. But when i make a call from IPO to SM, SM send me 407 Proxy Authentication Required and no routed call to ACM.

21:45:36.567 │──INVITE──►│ │ │ (2) T:1110011 F:9950009 U:1110011
21:45:36.569 │◄──Trying──│ │ │ (2) 100 Trying
21:45:36.572 │◄──Proxy A─│ │ │ (2) 407 Proxy Authentication Required
21:45:36.587 │────ACK───►│ │ │ (2) sip:[email protected]
21:45:37.139 │──INVITE──►│ │ │ (3) T:1110011 F:9950009 U:1110011
21:45:37.140 │◄──Trying──│ │ │ (3) 100 Trying
21:45:37.142 │◄──Proxy A─│ │ │ (3) 407 Proxy Authentication Required
21:45:37.188 │────ACK───►│ │ │ (3) sip:[email protected]


What is I doing not correct?

[kumar1499]

Try changing the entity link between SM to IPO as trusted, refer page 24 from below document.

https://downloads.avaya.com/css/P8/documents/100071713

[mitta3]

SM Line between SM R7.1 and IPO 9.1

check whether you have defined correct destination for dial pattern to ACM in SM when dialing from IPO.


IPO > SM > Dial Pattern 111 > Destination as SM-ACM Trunk >ACM

Check the trace on SM-ACM Trunk if u are getting any hit there.