Automatic call disconnect.

[fsharief60]

How to administer the maximum call time on trunk, means the trunk should disconnect the call automatically after administrated time.

I have set the Outgoing Trunk Disconnect timer = 8 min in COR of trunk & also Use Trunk COR for Outgoing Trunk Disconnect? = y in system-parameter feature, but still trunk is not disconnecting the call after 8 min.

Would appreciate if any one can help me on said issue.

[ista6]

Try the COR for the user/station.

[fsharief60]

Yes i have read the documents.

Can you please guide me the procedure for station COR.

As I understand it is similar as for trunk, only we need to modify COR of Station then set Use Trunk COR for Outgoing Trunk Disconnect? to n ?

Thanks for support.

[ista6]

I am not familiar with the CM so i can not tell you

ps

The "did you read the manua"l was not a question

[fsharief60]

Thanks for your support.

one more thing I like like to add in my previous post that we are taking PRI from Alcatel 4400 exchange does it create the problem?

Can anyone else help me on this issue? would appreciate your help. Thanks in advance.

[rclark123]

The outgoing trunk disconnect timer only affects outgoing public network trunks (CO, DIOD, FX, WATS, and ISDN public-network). If the Alcatel ISDN-PRI trunk group is a TIE type, then it's not considered a Public Network trunk and won't be eligible for the "Outgoing Trunk Disconnect Timer" feature.

[fsharief60]

Thanks.


Now it is working.

[arklite]

Hi
So what did you do for it to start working? I have similar issue