IP Office 500 V2

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • islam20
    Member
    • Nov 2015
    • 3

    IP Office 500 V2

    hi,

    i am new here, i have avaya ip office 500 v2 with 4610swip phones, now i want to setup internal extention setup and register my 30 phones with avaya ip office 500 v2 please any one help me...

    regards
    noman.
  • markgallagher
    Legend
    .
    • May 2010
    • 613

    #2
    That's such an open question. It all depends a lot on your network, etc. You need to read the appropriate IP Office and 4600 Series manuals.

    Start with https://downloads.avaya.com/css/P8/documents/101008934 .

    Comment

    • wellington35
      Whiz
      • Jul 2012
      • 44

      #3
      Markgallagher is right, you need to be more specific. Provide network address, DHCP, TFTP, FTP, HTTP info, as well as VLAN IDs.

      The IP Office can provide must of these services if configured correctly.
      Wellington Paez
      Senior Convergence Specialist @ Carousel Industries
      http://wellingtonpaez.com

      Comment

      • islam20
        Member
        • Nov 2015
        • 3

        #4
        Mark / Well,

        thanks for your replay, please tell me how i upgrade my 4610sw IP phone on h323 support please advise.

        i want to setup agent base call center i have IP office 500 v2 and i have 4610sw ip phone please guide me how i register all phones with IP office and also guide me how i do land inbound call or outbound call with this setup, and how i configure IVR on IP Office with recorded audios.....


        your promote reply will be highly obliged.

        thanks.

        Comment

        • zakabog
          Genius
          • Aug 2014
          • 300

          #5
          Where did you get the 500v2 and the phones? It sounds like you need to hire a business partner to come configure your phone system for you.

          Comment

          Loading