We recently installed an IP406v2 system and I am trying to get a couple of 3616 wireless phones working with it. After much work I can get the phones to talk to the Ip office unit but they won't connect due to an invalid password. All of My details are below. Need any additional info?? Let me know.
SETTINGS & CONFIGURATION
Ip Office 406 v2 IP Address: 10.10.10.150 User: Administrator Pass: Administrator
AVPP server: IP Address: 10.10.10.151
Cisco Aironet 350 AP IP Address: 10.10.10.170 User: Cisco Password: Cisco (set to factory, then Set IP & SSID, Firmware Ver 12.3(8)JEA3)
3616 Phone Settings
License Option: 009
Ext: 302
Password: 2222
IP Ofc Enabled
Static Ip
Phone IP 010.010.010.162
TFTP: 255.255.255.255
Default Gateway: 010.010.010.150
Subnet Mask: 255.255.255.0
Syslog Server: 255.255.255.255
Call Server IP: 010.010.010.150
Call Server Port: 1719
Avpp IP: 010.010.010.151
OAI Server IP: 255.255.255.255
Essid: cvnwifiphones
Security: None
Reg Domain: none
Ip Office Settings:
H323 Extension: 8003 302
EXTN
Extension ID: 8003
Base Extension: 302
Caller Display type: ON
Reset Volume: checked
Device Type: Unknown Ip Handset
Module 0
Port 0
VOIP
Ip Address: 10.10.10.162
Compression Mode: Automatic Select
TDM Gain: Default
IP Gain: Default
Supp Services: None
Voip silence Detection: unchecked
Enable Faststart: unchecked
Out of Band DTMF: Checked
Local Tones: unchecked
Allow Direct Media Path: Checked
USER:
Name: Flats Cordless
Password: 2222
Password Verify: 2222
Full Name: Flats Office Cordless
Extension: 302
AVPP Server
Software Version Numbers
Hostname: [SVP010], Address: 10.10.10.151
SVP Type: 010
Hardware Versions: 33/02
Factory Page: 213.001
Downloader: 71.005 (bbc58ae6)
Table of Contents: 173.028 (0d2c667e)
Functional Code: 174.028 (493b51d6)
File System: 175.028 (dafb7e48
Issue at hand:
The phone gets on the network and is pingable at its address of 10.10.10.162
It trys to connect to the IP Office unit, then says password error. If I try an extension that is in use it says extension in use so I know it is communicating with Ip office.
I have tried both a blank password and the current password I set up for the user account of 2222. It just continues to say password error.
SETTINGS & CONFIGURATION
Ip Office 406 v2 IP Address: 10.10.10.150 User: Administrator Pass: Administrator
AVPP server: IP Address: 10.10.10.151
Cisco Aironet 350 AP IP Address: 10.10.10.170 User: Cisco Password: Cisco (set to factory, then Set IP & SSID, Firmware Ver 12.3(8)JEA3)
3616 Phone Settings
License Option: 009
Ext: 302
Password: 2222
IP Ofc Enabled
Static Ip
Phone IP 010.010.010.162
TFTP: 255.255.255.255
Default Gateway: 010.010.010.150
Subnet Mask: 255.255.255.0
Syslog Server: 255.255.255.255
Call Server IP: 010.010.010.150
Call Server Port: 1719
Avpp IP: 010.010.010.151
OAI Server IP: 255.255.255.255
Essid: cvnwifiphones
Security: None
Reg Domain: none
Ip Office Settings:
H323 Extension: 8003 302
EXTN
Extension ID: 8003
Base Extension: 302
Caller Display type: ON
Reset Volume: checked
Device Type: Unknown Ip Handset
Module 0
Port 0
VOIP
Ip Address: 10.10.10.162
Compression Mode: Automatic Select
TDM Gain: Default
IP Gain: Default
Supp Services: None
Voip silence Detection: unchecked
Enable Faststart: unchecked
Out of Band DTMF: Checked
Local Tones: unchecked
Allow Direct Media Path: Checked
USER:
Name: Flats Cordless
Password: 2222
Password Verify: 2222
Full Name: Flats Office Cordless
Extension: 302
AVPP Server
Software Version Numbers
Hostname: [SVP010], Address: 10.10.10.151
SVP Type: 010
Hardware Versions: 33/02
Factory Page: 213.001
Downloader: 71.005 (bbc58ae6)
Table of Contents: 173.028 (0d2c667e)
Functional Code: 174.028 (493b51d6)
File System: 175.028 (dafb7e48
Issue at hand:
The phone gets on the network and is pingable at its address of 10.10.10.162
It trys to connect to the IP Office unit, then says password error. If I try an extension that is in use it says extension in use so I know it is communicating with Ip office.
I have tried both a blank password and the current password I set up for the user account of 2222. It just continues to say password error.
Comment