UCM 11.1 install fresh and when installing osboot fault is status in system status. Everything on the UCM looks normal (if using a montior and watching the install process. At boot I did run the ignition process and after that the system gets stuck at OS System Fault and will not start the applications in system status.
The card is inaccessible I have tried this with 2 different installations with a different USB flash drive. Also Different ucms and also different IP500 systems.
Not sure what the issue is or if this is a bug anyone else has ran into. Or any insite would be great thanks
The card is inaccessible I have tried this with 2 different installations with a different USB flash drive. Also Different ucms and also different IP500 systems.
Not sure what the issue is or if this is a bug anyone else has ran into. Or any insite would be great thanks
Comment