Resiliency for hunt group on IPO Server Select is not working

[takah]

Hi there,
I have a primary and secondary with release 11.1.1.0.0 build 209.

I have a primary and secondary IPO Server Select with resiliency. Turn the primary server off and the resiliency on secondary works,I have voicemail, pri,short codes except for groups.

Is there any other changes to make the group fail over to the secondary server?


Thanks in advance!

[beyer9]

The groups don't fail over the seconday. You need to create the groups in the solution that they are in the primary and secondary.

[takah]

Thanks for answer my question beyer9.
I tried add a group under solution.I have a group create with 2 primary sets and one set assign to gateway (IP Office 500 V2 with PRI). I have programmed a did to ring the group and the only set rings on the incoming call is the one assign to the 500V2/pri.
Calling group internally and rings all 3 sets.


Thanks,