IPO to CS100E

[michala22]

Doe anyone have information on tieing a IPO (7.0) to a CS1000E (6.0) using QSIG - no IP trunking

[saleha]

yes i did it and it is working fine .i do interfacing from ip office to cs 1000e as Qsig

[kirchenlo]

Hi,

we have done it in our office, but not using QSIG, we used standard EuroISDN and it works good as well. No major problem seen so far.

Except that CS1K after a change on IPO that does require reboot the E1 Line is out of service, repectively in no new calls (if you ar efmailar with CS1K, it is the maintenance stare inLD 60 which goes to NNC).