R8 remote h.323 9600

[ldunfo]

Hi

Has anyone managed to set up a remote handset on R8 ? Cant find any detailed instructions

Cheers

Lance

[ista4]

Yes i did that but it is very well documented so i suggest to take a better look.
It is very easy.

[ldunfo]

I cant find any specific details on how to configure the 9600. It just says waiting for LLDP

[ista4]

Then set it up static instead of DHCP.
I had that too.

[wkirk]

Manager: Telephone Features > Voice over IP Features
Remote H323 Extensions

http://marketingtools.avaya.com/knowledgebase/businesspartner/ipoffice/mergedProjects/manager/remote_http_extensions.htm

For IP Office Release 8.0+, the configuration of remote H323 extensions is supported without needing those extensions to be running special VPN firmware. This option is intended for use in the following scenario:

•The customer LAN has a public IP address which is forwarded to the IP Office system. That address is used as the call server address by the H323 remote extensions.
•The user has a H323 phone behind a domestic router. It is assumed that the domestic router allows all outbound traffic from the home network to pass through and allows all symmetric traffic. That is, if the phone sends RTP/RTCP to a public IP address and port, it will be able to receive RTP/RTCP from that same IP address and port. If this is not the case, the configuration of the user's router to support that is not covered by this documentation.

•Supported Telephones
Currently remote H323 extension operation is only supported with 9600 Series phones already supported by the IP Office system.
•License Requirements
By default only 4 users can be configured for remote H323 extension usage.

Kirk

W.K. "Kirk" Kirk | Avaya | TechniCenter Engineer | Technical Support and Proposal Management ~ SME Pre-Sales Support
Highlands Ranch, CO 80129 | Voice: 1-888-297-4700 | [email protected]
[Please consider the environment before printing this email]


DOWNLOAD THE NEW R8 MATRIX NOW BY CLICKING HERE: R8 Matrix

Click here for – IP Office Knowledge Base

[jonrooney]

Hi ldunfo,

Not sure if you got this working or not, i had difficulties in finding the instructions as well.

If you load up the manager program, then click help and contents, navigate to Telephone Features, then Voice over IP Features then remote h323 extensions you will find the info you need.

When using the stun command, i used the following address: 217.10.68.152

Thanks

Jon