Hello,
We will be installing an Upgrade IPO 500 V2 from a IPO 406 with some 4 x 30 port extension modules. Currently siting at Version 3.2.
They have extensions in all 100 + rooms which may or may not be allocated an extension on the system.
The customer programs a new extension then “HOT DESKS” this number in to the phone and all is ok.
Currently, if for some reason the system reboots or has a power cut, the Delta server logs all the users back in automatically.
If we install IPO 500 V2 version 8.0, what can we do about the auto log in? Will we have to re-log in all 100+ phones?
Has anybody had any experience with this? Can we still use the Delta server with IPO 500v2 8.0?
Thanks in advance for any assistance.
Rudi Prinsloo
We will be installing an Upgrade IPO 500 V2 from a IPO 406 with some 4 x 30 port extension modules. Currently siting at Version 3.2.
They have extensions in all 100 + rooms which may or may not be allocated an extension on the system.
The customer programs a new extension then “HOT DESKS” this number in to the phone and all is ok.
Currently, if for some reason the system reboots or has a power cut, the Delta server logs all the users back in automatically.
If we install IPO 500 V2 version 8.0, what can we do about the auto log in? Will we have to re-log in all 100+ phones?
Has anybody had any experience with this? Can we still use the Delta server with IPO 500v2 8.0?
Thanks in advance for any assistance.
Rudi Prinsloo
.
Comment