IP Office UC Module problem

[riosg]

I'm trying to install an UC Module to our IP Office. After Startup the Led is Solid Green with Amber blink and that means that IP Office heartbeat is okay. But when try to get acces to initialize the module can not get access to it. I'm using the IP Office Lan1 IP Address follow by port 7070. For example http//:172.16.1.3:7070
Is there something else that I need to do before that?

I will appreciate any support.

[fschreiber]

Hi,
Is your IPO in R8.0.34 or > version ?

[robbiebrown34]

Can you 'see' the module in Manager under control units? If so it will provide the IP address for the unit. It may be different to what you are trying.

Thanks

[eleifs]

UC module

hi
if this is first time you connect try ipaddress on ipoffice:7071
Which version are you using ?