no CLID on IP-DECT

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • lutz1008
    Hot Shot
    • Dec 2010
    • 21

    no CLID on IP-DECT

    Hello Commnunity

    I have a IPOffice and an IP-DECT with Rls 8.1.56 and i have a problem with the CLID transfer. All calls goes out but on the DECT Phones (3725) is the clid missing. It shows no Extension by the called Phone. On the IP-Phones it's works fine. I use this short code, 0N -> dial - > 0NSi62284E -> goes in ARS, by the user for all phones.

    I hope you can help me
    Thanks you

    Lutz Ulsperger
  • lutz1008
    Hot Shot
    • Dec 2010
    • 21

    #2
    Hello

    I found the failure. It was the wrong number and in this cause the provider changed the clid.

    Lutz

    Comment

    Loading