How to know which extension use analog trunk line

[melkab]

if other extension use analog trunk line, can i know from my extension which extension use analog trunk line ?

[dang3]

Without using the Avaya IP Office System Monitor application? Can you explain further? And do you mean without doing any programming within IP Office Manager to assign you the trunk appearance on your phone?

[melkab]

I mean if there is shortcode or featured i should programmed in ip office 500 v2 essential edition for telephones like 1616i model or 1608 model which i was programmed before for line appearance in button programming,

to see if one trunk analog line is in used by another extension, i can know which extension use this trunk line . Because this feature existed before in bcm50 but i don't know if it existe in ip office.

[melkab]

there is way, in configuration of ip office 500 R8.2 essential edition ,if I press button line appearance which currently in used by another extension , i can know which extension used trunk line in same times

[dang3]

Sorry, I don't know this one. Perhaps another forum member might know...

[a32]

Connect 1608-i to another phone device

Is it possible to connect for example via RJ-11 outlet (for earphones) the additional DECT-device in order to make OUTGOING calls as well as through main device?