Microsoft LYNC 2013 and IP Office Integration

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • mfrat
    Aspiring Member
    • Feb 2014
    • 1

    Microsoft LYNC 2013 and IP Office Integration

    Customer has IP Office 9.x and Microsoft LYNC 2013 and wants to use LYNC with IP Office.
    According to Avaya documentation it is not supported, or is it?
  • kweidlich1
    Hot Shot
    .
    • May 2014
    • 15

    #2
    Lync 2013 integration is NOT supported at this time. Lync 2010 only.

    Comment

    • ssenthil
      Aspiring Member
      .
      • Jun 2013
      • 1

      #3
      Team,

      IPO9.0 SP3 supports MS LYNC 2013 both 32 and 64 bit.




      Regards,
      SSenthil
      Known is a Drop;Unknown is a Ocean
      Attached Files

      Comment

      • kirchenlo
        Guru
        • Nov 2010
        • 195

        #4
        Hello,

        Lync 2013 is supported as I have done an integration at the customer some days ago. You will need "Preferred Edition" (as you will need One-X Portal as middle ware to the Lync 2013 Plug In) and at least "Office Worker" licenses for the user which should integrate with Lynch. The IP Office should run 9.0.



        From my point i can say it works well.

        Comment

        • evansphil
          • May 2015
          • 1

          #5
          Lync Integration

          Hi,

          Lync 2013 client is now called Skype for Business ... and I cant see the Avaya Settings button at the bottom of the client window.

          Any suggestions?

          Cheers, Phil

          Comment

          • oiduran
            Genius
            • Nov 2013
            • 204

            #6
            Yep Evansphil, the lync microsoft changed. We have the same problema, I believe tha Avaya must develop a Solution. I don't know that make...

            Comment

            • tandrist09
              Member
              • Jun 2015
              • 5

              #7
              Same issue here

              Plugin 6.3 won't load at all with Lync 2013 so I upgraded to version 6.4 and although that loads the module on the bottom of the Lync client, it will not connect to the 1x portal server?

              Comment

              Loading