IPO SE First Installation

[mqatatsheh]

Hello ...

This is my first time installation IPO SE, I have read all the documents about IP Office Server Edition Installation and Deploymentز
Before Start the Installation, I would like to sure that all my steps is correct.
My friend adviced me that I put what I want here and discuss it with you.

I have Primary and Secondary Server, Dell R210 (from Avaya)
I have 1PO 500v2 Expansion and 3 DS30 EX Module

1. Connect ETH 1 from Server to Switch and Configuring IP Office Server Edition Primary using the ignition process
2. Connect ETH 1 from Server to Switch and Configuring IP Office Server Edition Secondary using the ignition process
3. Connect LAN 1 from Server to Switch and Configuring IP Office Expansion using the ignition process
4. OPen The IPO Manager Server Mode and Add the Secondary Server and Expantion System.
5. Adding SE License's and IP Endpoints on the Primary Server
6. Save and sent.

Thanks

[mqatatsheh]

IPO SE First Installation

Hi ...

Any Updates ???

[richa164]

As pointed out to you on tektips many times , you need to provide the updates , you will need to follow the information here

http://marketingtools.avaya.com/knowledgebase/

server edition /deployment , that will give you all the information you require on your specific build.

[mqatatsheh]

IPO SE First Installation

Hi ...

I read the deployment, Just I need to know that my steps is correct .

Thanks

[richa164]

Just like you know how to licence a system?