ougoin call ip office server edition

[brunem]

Good Moorning ,

I have installed a ip office server edition release 9.0.5 .
The solution have one Primary Server (New York ) and also one Expansion Ip office 500 V2 locate in another town with only digital station Avaya 1408.

The customer want make outgoing call from Digital extension in the town when dial 9 go to sip trunk locate in New York.

When i make Ars table in the small town i can not select the line group from primary server ? i think i canselect only local line Group ?

Please Help Me

THanks

[markgallagher]

Just use the outgoing line group ID of the SCN trunk that goes to the primary. The settings on the primary then reprocess the dialing and route it to the correct trunk on the primary.

[brunem]

thanks for help me ,
my Linux server and IP 500 V2 expansion are configure in LAN1 ( same network voice vlan , i can configure Sip trunk to LAN2 port in the Linux Server? i need add my network Avaya SBCE ( Session Board Controller ) , where and when i need ?
thanks