Dect R4

[gtelliott]

Hi,

Having a very bad day, I've setup many R4 Dect solutions but this one has me beat.

I am having a problem with getting a Dect Line becoming active.
I have upgraded the system to 9.0.12.0.1006, and I upgraded the base station to v7p2p24
I have checked the system security settings, and created a Dect line.
I have check the Base is set to IPO mode
I can ping the Base station via System status and I can ping System via Base Diagnostic screen but the Dect Trunk will not go active.

I tried defaulting the Base station, deleting the Dect line and trying a different Base Station, every time same issue.
I have also tried setting the Dect up on Lan 2 off the customers network aswell.

Any other ideas would be great.

[gtelliott]

Horay problem solved, changed the pbx type back to ACM reset and then back again to IPO and reset. No idea way but it worked.