Adding Expansion 500V2 to IPOSE

[pthiru]

We were trying to add new IPO 500 V2 control unit (R11) to IPO Server Edition R8.1. We added IPOSE ADI license in the server and configured expansion system.

SCN lines is not showing BOTHWAY.

Please advise.

[thiel2]

That's networking

The SE should have an SCN like configured to the Expansion's LAN-1 address, the Expansion should have an SCN line configured to the SE's LAN-1 address. There should be an IP Route with the gateway specified on each system so that they can communicate.

[pthiru]

Thank You So Much