4621 and 9621 IP Phones

[ccasey3]

When we redial external phone numbers, the system inserts 9011.
How can we eliminate these digits from being inserted.
I know it must be somewhere in the scripting of the phones, but where in the scripting.
Can anyone assit me.
Thank you.

[sunilkumarv]

Hello,

you can modify "Enhanced local dialing rules" in the setting file...

below are the parameters you will find for dialing rules.

############ ENHANCED LOCAL DIALING RULES ############### ## ## These settings affect certain dialing behaviors, such as ## dialing numbers from the incoming Call Log or from web pages ## ## Dialing Algorithm Status ## Controls whether algorithm defined by parameters in ## this section is used during certain dialing behaviors. ## 0 disables algorithm. ## 1 enables algorithm, but not for Contacts ## 2 enables algorithm, including Contacts (96xx SIP only) ## SET ENHDIALSTAT 1 ## ## Country Code ## For United States the value is '1' ## SET PHNCC 1 ## ## Internal extension number length ## If your extension is 12345, your dial plan length is 5. ## On 46xx phones, the maximum extension length is 10. ## On 96xx phones, the maximum extension length is 13. ## This value must match the extension length set on your ## call server. ## SET PHNDPLENGTH 5 ## ## International access code ## For the United States, the value is 011. ## SET PHNIC 011 ## ## Long distance access code ## SET PHNLD 1 ## ## National telephone number Length ## For example, 800-555-1111 has a length of 10. ## SET PHNLDLENGTH 10 ## ## Outside line access code ## The number you press to make an outside call. ## SET PHNOL 9