Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   IP Telephony and Convergence (http://support.avaya.com/forums/forumdisplay.php?f=8)
-   -   Processor Ethernet CM 6.0 / 6.2 (http://support.avaya.com/forums/showthread.php?t=2535)

richwallot 03-04-2013 07:39 AM

Processor Ethernet CM 6.0 / 6.2

What might the repercusssions be of enabling processor ethernet on duplex common servers. Will there be a service disruption, does CM have to restart?

If I enable on the standby server then interchange will I disrupt service?


mskinner 03-05-2013 06:22 AM

Processor Ethernet comes turned on by default. The customer just needs to administer it and there will be no service disruption.

richwallot 03-05-2013 08:29 AM


For reasons I am unaware of, the processor ethernet was disabled at install. It should be noted that on the CM virtual machine, that eth0 and eth 1 are restarted. This is on a duplex system so no harm no foul. I'm not sure if I would have the same results on a simplex system which may result in a short outage?

All times are GMT -7. The time now is 08:56 AM.