View Single Post
  #2  
Old 10-30-2019, 04:49 PM
thiel2 thiel2 is offline
Genius
 
Join Date: Apr 2013
Posts: 345
thiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation pointsthiel2 has 50 to 99 reputation points
Default

If you were dealing with a single IP 500 control unit, you would have a short code of 9N / Dial / N / 50:Main to take what you dialed after 9 and send it to the ARS table that sends the call out on the Analog lines.

With a Server Edition, you have a trunk between the SE and the IP 500. It will have a Line Group number of something like 99997 for instance.

On the SE, you need a short code of 9N / Dial / 9N / 99997 to get the dial string from the SE to the 500, AND include the leading 9 so that the IP 500 receives 9+number, sends just the number portion to the ARS table and the call goes out as expected.
Reply With Quote