![]() ![]() |
#1
|
|||
|
|||
![]()
Hello all,
We are troubleshooting a missing redirecting number IE (aka diverting number IE) in the h225 channel for an h323 trunk. This is a brand-new CM6.3 with all the updated patches. tshark shows the following trace. Note that we get the name of the redirecting station ("CM6 station 2"), but we do not have the redirecting number (which should be 3201): Code:
Facility INV: divertingLegInformation2 Type: Facility (0x1c) Length: 65 ...1 1111 = Protocol profile: Networking extensions (0x1f) NetworkFacilityExtension sourceEntity: endPINX (0) destinationEntity: endPINX (0) InterpretationComponent: discardAnyUnrecognisedInvokePdu (0) ROS: invoke (1) invoke invokeId: present (0) present: 44 opcode: local (0) local: 21 - divertingLegInformation2 argument: 30800201010A0103800103A380800D434D36207374617469... QSIG: divertingLegInformation2 Operation: divertingLegInformation2 (21) Service: QSIG-CF (13873) - Call-Diversion-Operations ARG-divertingLegInformation2 diversionCounter: 1 diversionReason: cfnr (3) originalDiversionReason: cfnr (3) redirectingName: namePresentationAllowed (0) namePresentationAllowed: namePresentationAllowedSimple (0) namePresentationAllowedSimple: CM6 station 2 extension: single (5) single extensionId: 1.3.12.2.1016.1.2 (SNMPv2-SMI::org.12.2.1016.1.2) Code:
ARG-divertingLegInformation2 diversionCounter: 1 diversionReason: cfnr (3) originalDiversionReason: cfnr (3) divertingNr: presentationAllowedAddressNU (0) presentationAllowedAddressNU: unknownPartyNumber (0) unknownPartyNumber: 3201 We've turned on SA8052 but it doesn't seem to help. Any direction you can offer for further troubleshooting and resolution would be greatly appreciated! |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|