Avaya Support Forums  

Go Back   Avaya Support Forums > IP Telephony and Convergence

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 02-12-2014, 10:38 AM
holt15 holt15 is offline
Aspiring Member
 
Join Date: Jan 2014
Location: UK
Posts: 1
holt15 has 10 reputation points
Post BT Direct Acces Lines (DALS)

Does anybody have any experience of the correct settings for a MM710 DS1 card to connect to a BT international DAL E1 circuit

We are getting conflicting information from our supplier and BT and I wondered if anybody else had them

The configs we have work but in one site in Hungary we have had to setup different to the rest of the circuits on that site and in the other sites

any help or advise gratefully accepted
Reply With Quote
  #2  
Old 06-16-2014, 04:31 AM
mohammedh mohammedh is offline
Member
.
 
Join Date: Apr 2012
Posts: 7
mohammedh has 10 reputation points
Default

I dont have the specific configuration for this service provider.Usually it requires three fields to be administered -add ds1,add signalling and add trunk.

It seems you are already aware and have working configuration in certain sites.Can you paste that config and tell me what error is seen when the same is used on this specific site?
Reply With Quote
  #3  
Old 06-16-2014, 09:19 AM
gcording gcording is offline
Hot Shot
 
Join Date: Apr 2010
Posts: 11
gcording has 11 reputation points
Default

DS1 CIRCUIT PACK
Location: ?????
Name: MXBT??????
Bit Rate: 2.048
Line Coding: hdb3
Signaling Mode: isdn-pri
Connect: pbx
Interface: user
TN-C7 Long Timers? n
Country Protocol: etsi
Interworking Message: PROGress
Interface Companding: alaw
CRC? y
Idle Code: 01010100
DCP/Analog Bearer Capability: 3.1kHz
T303 Timer(sec): 4
Disable Restarts? y
Slip Detection? y
Near-end CSU Type: other
Echo Cancellation? n

Signal Group needs to have Supplementary Services set for C (ETSI)

Reconfirm ETSI Protocol with BT and CRC Settings to Yes.
__________________
If it aint broke, dont fix it!
------------------------------------
Avaya Certified Numpty
www.about.me/gcording
www.linkedin.com/in/gcording
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 06:09 PM.

This Forum is provided solely for the use and convenience of Avaya customers and partners. Use of the Forum is subject to the Terms and Use and Privacy Statement found at www.avaya.com. No other use is permitted. The Forum including all content posted is “AS IS” and Avaya expressly disclaims all warranties and/or guarantees as to its accuracy, reliability, usefulness, quality or non-infringement of intellectual property. Avaya reserves the right to remove any content posted on the Forum at any time and for whatever reason.

Avaya will not be liable for any content posted on this Forum, including, without limitation, any errors or omissions or for any losses or damages of any kind incurred as a result of use or reliance on any content, regardless of its origin.

You expressly understand and agree that you assume all risks associated with use or reliance on this content.