Setting Up Mnagaement IP on the VPN Gateway box

Doc ID    SOLN238496
Version:    1.0
Status:    Published
Published date:    18 Oct 2013
Author:   
Sahil Bhat
 

Details

Unable to apply management IP for Nortel 3050.
VPN gatway 3050

Problem Clarification

Unable to apply management ip

Cause

Box shifted to new location

Solution

Connect a computer to the VPN Gateway’s console port via serial cable.
Use a terminal application (e.g. TeraTerm) to configure the VPN Gateway.
Wait until you get a login prompt.
Log in as user: admin, password: admin(default)

Choose new from the Setup menu.
Setup# new

Specify the port you want to use for network connectivity
Enter port number for the management interface [1-4]: 1

Specify the host IP address for the current VPN Gateway.
Enter IP address for this machine (on management interface): <IP
address>
This IP address must be unique on your network and be within the same network address range
as the Management IP address

Enter network mask and VLAN tag ID.

Press ENTER to continue with creating a one-armed configuration.

Enter a default gateway address.

Enter a Management IP address (MIP).
Enter a unique Management IP address (MIP) that is within the same network address range as
the host IP address and the default gateway IP address.

Enter the Management IP (MIP) address: <IP address>
Making sure the MIP does not exist...ok
Trying to contact gateway...ok

Restricted Solutions Elements

To allow remote BBI access, enter the following commands in the CLI.
 Enable HTTP access and set the HTTP logical port:
NOTE – The default HTTP port value is well-known HTTP port 80. If you change this value
(for example, to 81), users must append the port value to the host IP address (for example,
http://10.10.1.110:81) when opening a connection to the Avaya VPN Gateway or SSL Processor.
If you set up HTTP to HTTPS redirection during the initial setup procedure, port 80 is
occupied. Specify another port number (for example 81) for BBI access through HTTP.
 Enable HTTPS access:
>> Main# /cfg/sys/adm/http/ena HTTP access enabled
>> Main# /cfg/sys/adm/http/port 80 HTTP port set to 80 (default) 


Avaya -- Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy