S8510: Server hardware and environment events 2048 Failure

Doc ID    SOLN262072
Version:    1.0
Status:    Published
Published date:    12 Jan 2015
Author:   
Chris Alphonsus Macaisa
 

Details

The following table contains a list of the S8510 server hardware and environment monitoring
alarms. All of the failure events are major alarms. The table contains information regarding the
Event ID, the severity of the event, and a link to the description and recovery action(s).

 

The alarm message for hard disk drives contains the disk number of the failing or failed drive.
An example of an alarm message for Event ID 2048 would be:
Storage Service EventID: 2048 Device failed: Physical disk 0:0:1 Controller
0, Connector 0

"2048 Failure"

Problem Clarification

 

A power supply has been disconnected or has failed. The following information is displayed:
• Sensor location (location in chassis)
• Chassis location: (name of chassis)
• Previous state was: (state)
• Power Supply type: (type of power supply)
• <Additional power supply status info)
• Configuration error type: (if in configuration error state, the type of configuration error)
 

Cause

A storage component such as a physical disk has failed.
 

Solution

Procedure
1. Replace the failed component.
2. Perform a rescan after replacing a disk


Avaya -- Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy