ERS 5000: Traffic Meter and Shaping

Doc ID    SOLN286861
Version:    1.0
Status:    Published
Published date:    06 Apr 2016
Author:   
fbarone
 

Details

The Ethernet Routing Switch 5500 supports both policing/metering of ingress traffic in addition to egress port shaping.

Problem Clarification

When configuring traffic metering or shaping, a committed rate, a maximum burst size and burst duration is entered.

Cause

Customer need for below requirements:

 

Below is the requirement for the customer
 
Two port based Vlans VID  20 and VID 24
 
Port 13 is connected to a an ISP with 200meg CIR, port 13 is untagged access port,
port 13 is a member of Vlan 20.
 
Ports 1-4 are connected to workstations they are untagged access ports, ports 1-4
are members of Vlan 20.  Ports 1-4 need to be setup for a maximum data rate of 50meg
using QOS and traffic shaping.
 
Port 14 is connected to a an ISP with 200meg CIR, port 14 is untagged access port,
port 14 is a member of Vlan 30.
 
Ports 5-8 are connected to workstations they are untagged access ports, ports 5-8
are members of Vlan 30.  Ports 5-8 need to be setup for a maximum data rate of 50meg
using QOS and traffic shaping.

Solution

Provided possible examples along with attached TCG 

 

Filters and QOS Configuration for Ethernet Routing Switch 5500 Technical Configuration Guide

Attachment File




Avaya -- Proprietary. Use pursuant to the terms of your signed agreement or Avaya policy