exec-summary http-turns

Define number of HTTP turns on an average web page (used to show time savings in executive summary snapshot report).

exec-summary http-turns <min> <max>
 
no exec-summary
 
no exec-summary http-turns
 

• min--minimum number of turns on a page; range: 0 through 10000
• max--maximum number of turns on a page; range: 0 through10000

Must be in report configuration mode (config-reporting), which requires privileged-level access.

Use once.

min--20

max--150

The exec-summary http-turns command specifies a range of HTTP turns, representing a page on your web server.

In order to download a complete web page, a client typically needs to contact the server several times, as it obtains graphics and other supporting files specified in the page definition. Each completed contact represents one HTTP turn.

These numbers will be used to calculate the seconds saved range of values shown on the Executive Summary snapshot report.

Use the no exec-summary command to reset all executive summary parameters to their defaults, including those set by each of the following commands:

• exec-summary http-turns
• exec-summary improvable min-hrtt-saving
• exec-summary improvable min-percent-improvement
• exec-summary min-bgp-hrtt
• web-speedup worst-bgp-hrtt-percent

Use the no exec-summary http-turns command to reset only the HTTP turn values to their defaults.