exec-summary min-bgp-hrtt

Defines one of the brownout conditions--speed of packet delivery--for the Executive Summary snapshot report.

exec-summary min-bgp-hrtt <value_1> <value_2>
 
no exec-summary
 
no exec-summary min-bgp-hrtt
 

• value_1--minimum HRTT value (milliseconds) required to be considered poor; range: 0 through 1000000
• value_2--minimum HRTT value required to be considered very poor; range: 0 through 1000000

Must be in report configuration mode (config-reporting), which requires privileged-level access.

Use once.

value_1--1000000

value_2--1000000

Use the exec-summary min-bgp-hrtt command to set one of the two types of criteria used to define poor and very poor performance in the Executive Summary snapshot report. The other criteria is defined as “worst N percent of all prefixes,” set by the web-speedup worst-bgp-hrtt-percent command.

The minimum BGP values set the threshold for HRTTs (handshake round trip times, in milliseconds) on the worst performing BGP route in your network:

• If a prefix measurement is at least as high as value_1 and it qualifies as one of the worst N prefixes, it will be factored into the Poor Performance column of the Executive Summary snapshot report.
• If the prefix measurement is at least as high as value_2 and it qualifies as one of the worst N prefixes, it will also be factored into the Very Poor Performance column.

Use the no exec-summary command to reset all executive summary parameters to their defaults, including those set by each of the following commands:

• exec-summary http-turns
• exec-summary improvable min-hrtt-saving
• exec-summary improvable min-percent-improvement
• exec-summary min-bgp-hrtt
• web-speedup worst-bgp-hrtt-percent

Use the no exec-summary min-bgp-hrtt command to reset only the minimum BGP HRTT values to their defaults.