Previous page Next page

Procedure

To disable absolute alarms for a test type:

  1. Access Chatter Alarm Configuration command mode. To access this mode, enter the following commands:
a. enable (Privileged mode)
b. configure terminal (Configuration mode)
c. module chatter (Chatter Configuration mode)
d. alarm name <name> (Chatter Alarm Configuration command mode)
  1. Use the commands in Table 12 to disable absolute alarms for a test type. You can disable absolute alarms for specific test variables or all variables.
Table 12:  Alarm template: disable absolute alarm commands  
Command
Purpose
Disables absolute alarms for RTP tests on any zone or edge that is assigned this alarm template.
You can control generation of absolute alarms for each variable individually or all variables collectively.
Disables absolute alarms for Ping tests on any zone or edge that is assigned this alarm template.
You can control generation of absolute alarms for each variable individually or all variables collectively.
Disables absolute alarms for Traceroute tests on any zone or edge that is assigned this alarm template.
You can control generation of absolute alarms for each variable individually or all variables collectively.
Disables absolute alarms for TCP tests on any zone or edge that is assigned this alarm template.
You can control generation of absolute alarms for each variable individually or all variables collectively.

Previous page Next page