DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



Downloading Firmware to Port Circuit Packs

Copy image from a PC to source board

Return to Task List

The source board for R10 is the TN799x Control Lan (C-LAN) circuit pack. You use an FTP program to download the files to the source board.

You'll need the IP address for the source board, which you can get from your data systems administrator or by typing the following series of commands:

  1. list configuration board UUCSS to make sure the port is enabled (look for the number 17).

  2. display port UUCSS 17 to obtain the data module ID.

  3. display data-module ID to obtain the link number.

  4. status link link_number to check the link status and obtain the source IP address.

You can use any FTP program. Please follow the instructions for your specific program. The steps are generic to most FTP programs.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.