DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



Install Telecommunications Cabling

Install Cables Between Cabinet and MDF

Return to Task List

  1. Install D rings on the wall between the cable slack manager and the terminal/connecting blocks mounted on the MDF.

  2. Install a self-adhesive port label on the back of each connector on the connector cable. Position the labels so the cabinet connector retainers do not cover them.

  3. At the rear of the cabinet, connect 1 end of the connector cable to the assigned connector.

  4. Route the cable down the rear of the cabinet, through the cable slack manager, and to the MDF.

  5. At the MDF, connect the other end of the cable to the assigned terminal/ connecting block connector.

  6. Store the cable slack in the cable slack manager.

  7. Repeat Steps 2 through 6 until all cables are installed.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.