 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
DEFINITY Made Easy Tools
Issue 3, December 2001
Installing the Stratum 3 Clock
Connect Stratum 3 Clock DC Power
- Set the clock cabinet circuit breaker at the DC power plant OFF.
- At the clock cabinet, connect a 6 AWG (#40) (16 mm 2) ground wire to the -48V terminal on the terminal strip.
- At the clock cabinet, connect a 6 AWG (#40) (16 mm 2) wire to the -48VRTN terminal on the terminal strip.
- Route the wires out of the cabinet and to the DC power plant.
- At the DC power plant, connect the -48V wire to the DC OUTPUT circuit breaker.
- At the DC power plant, connect the -48VRTN wire to the DISCH GRD bar.
|
|
|
|
|
|
|
|
|
|
| Copyright� 2001 Avaya Inc. |
| Send comments to MadeEasy Development Team |
| Always check at the Made Easy Web site for the most current information. |