DEFINITY Made Easy Tools
Issue 3, December 2001

Install and Wire Telephones

---

Adjunct Power Connection Locations

Return to Task List

Example Adjunct Power Connections shows typical connection locations for adjunct power. Adjunct power for station equipment may be supplied from the equipment room, satellite location, or the work location.

For this figure, the following example is used:

1. If 25 telephones are connected to the system and all 25 telephones need adjunct power, install a bulk power supply in the equipment room.


2. If only ten of the telephones need adjunct power, install a bulk power supply at the satellite location.


3. If only one telephone needs adjunct power, install the individual power supply at the work location.

Example Adjunct Power Connections

Figure Notes:

1. Typical Display Telephone


2. Individual Power Supply (Such as 1151A1 or 1151A2)


3. Information Outlet (Modular Jack)


4. 4-Pair D-Inside Wire (DIW) Cable


5. Satellite Site or Adapter Location


6. 25-Pair D-Inside Wire (DIW) Cable


7. Station Side of Main Distribution Frame (MDF)


8. 100P6A Patch Cord or Jumpers


9. System Side of Main Distribution Frame (MDF)


10. 25-Pair Cable to System Cabinet (Analog Line Circuit Pack)


11. Equipment Room


12. Satellite Location


13. Work Location


14. Bulk Power Supply (Such as 1145B)

Return to Task List

---

Copyright� 2001 Avaya Inc.

Send comments to MadeEasy Development Team

Always check at the Made Easy Web site for the most current information.