 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
DEFINITY Made Easy Tools
Issue 3, December 2001
Install and Administer Trunks
Installing the Circuit Pack
- Insert the TN429C or later CO trunk circuit pack in any available port slot. Be sure the TN744D Call Classifier - Detector circuit pack is Vintage 2 or later.
- Wire the CAMA trunk to the MDF (the trunk from the CO). Refer to the pinouts in Circuit Pack and Auxiliary Equipment Leads (Pinout Charts) for 2- and 4-wire analog and digital lines, 8, 16, and 24 ports; hybrid line; MET line; AUX and CO trunk or Circuit Pack and Auxiliary Equipment Leads (Pinout Charts) for 3-wire CO trunk, DID/DIOD trunk, tie and DS1 tie trunk, 2- and 4-wire ISDN-BRI lines, packet data line, and 4 port DIOD..
|
|
|
|
|
|
|
|
|
|
| Copyright� 2001 Avaya Inc. |
| Send comments to MadeEasy Development Team |
| Always check at the Made Easy Web site for the most current information. |