DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



Test Telephones and Other Equipment

Verify Timing to the System

Return to Task List

  1. To administer the Stratum 3 clock, type change synchronization and press Enter .

  2. Type 3 in the stratum field.

  3. Type the port network number where the TN780 Tone-Clock circuit packs reside in the port network field.


Note: Wait 1 minute for the software to reconfigure the system synchronization.

  1. Verify the results of test 649. If test 649 fails with a code of 2101, then check the wiring for EXTSYN0 and EXTSYN1. Refer to DEFINITY Enterprise Communications Server Maintenance for R10r.

If test 649 is successful, then the system is getting correct timing from the Stratum 3 clock.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.