DEFINITY Made Easy Tools
Issue 3, December 2001

G3V4vs/R5vs/R6vs to R10si (On-Site)

---

Run acceptance tests [G3V4vs, R5vs, R6vs to R10si]

Return to Task List

Run any acceptance tests that are appropriate for this upgrade. The acceptance tests are listed in these 3 checklists:

Test single-carrier cabinet systems

Test multi-carrier cabinet systems

Test telephones and other equipment

For details of the tests, see

Test the System

Test Telephones and other Equipment

Test single-carrier cabinet systems

1. Check System Status for Each Cabinet


2. Check Circuit Pack Configuration


3. Test Time Division Multiplexing Bus in Processor Port Network


4. Test Tone-Clock Boards


5. Test Expansion Interface Circuit Packs


6. Test Time Division Multiplexing Bus for Each Expansion Port Network


7. Test Tone-Clock for Each Expansion Port Network


8. Test Tone-Clock Interchange for Each Expansion Port Network


9. Test Expansion Interface Exchange for Each Expansion Port Network


10. Check Circuit Pack Configuration


11. Save Translations, if Required

Test multi-carrier cabinet systems

1. Check System Status for Each Cabinet


2. Check Circuit Pack Configuration


3. Test TDM Bus in PPN


4. Test Tone-Clock Circuit Packs


5. Test SPE Duplication Memory Shadowing Link


6. Test Duplicated Switch Processing


7. Element Interchange


8. Test Expansion Interface Circuit Packs


9. Test TDM for each EPN


10. Test Tone-Clock for each EPN


11. Test Tone-Clock Interchange for each EPN


12. Test Expansion Interface Exchange for Each EPN


13. Check Circuit Pack Configuration Again


14. System Test Completion


15. LED Indicators

Test telephones and other equipment

1. Make Test Calls


2. Test 302C Attendant Console


3. Test External Ringing


4. Test Queue Warning Indicator


5. Test Integrated Announcement


6. Test Music-on-Hold


7. Test Emergency Transfer


8. Test Remote Access Interface


9. Test Basic Rate Interface


10. Test Duplication Option Processing


11. Element Interchange


12. Test Terminating Trunk Transmission


13. Test Stratum 3 Clock


14. Perform Complete System Test


15. Activate and Test Alarm Origination Feature

Return to Task List

---

Copyright� 2001 Avaya Inc.

Send comments to MadeEasy Development Team

Always check at the Made Easy Web site for the most current information.