DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



G3V4vs/R5vs/R6vs to R10si (On-Site)

Save announcements and translation [G3V4vs, R5vs, R6vs to R10si]

Return to Task List

  1. Remove the original translation card(s) from the TN2401 NetPkt circuit packs. These cards are not formatted to be used with the new TN2401.

  2. Insert the new translation card(s) into the TN2401 circuit packs.

  3. Type save announcements and press Enter.


Note: Use this step only for systems equipped with the TN750 or TN750B announcement circuit pack.

This takes about 45 minutes.

  1. Type save translation and press Enter to copy upgraded translations in memory to the new translation card, which takes about 20 minutes.


Note: It takes longer to save translations to the new, larger flashcards.


Note: Do not press any keyboard key until after the screen displays the success message. For example, if you press Enter more than once after typing the command, the second Enter erases the screen and you never see the success message.


Note: If the save translation command fails, do not continue. Record the error code that appears on the screen and escalate the problem immediately.

Keep the translation media in a safe and secure place.

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.