DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

DEFINITY Made Easy Tools
Issue 3, December 2001



Release 9si to R10si

Determine active SPE

Return to Task List

Duplicated systems only

  1. Type status system 1 and press Return.

    2. Determine which side is the active SPE.

  2. Ensure that the standby tone/clock = stdby and that the standby SPE = stdby.

  3. If the active tone/clock is on the active side, skip this step. Otherwise,

    1. Type refresh spe-standby and press Return.

    2. Type busyout spe-standby and press Return.

    3. Type release spe-standby and press Return.

    4. Type status system 1 and press Return.

      5. Ensure that the active tone/clock is set to the active side.

  4. Lock the SPE switches on the DUPINT circuit packs to the active SPE.


Note: Ensure that the active tone clock is in the active SPE before continuing.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2001 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.